Solid stone pine sauna with corner entry and glass front – Swiss made to measure
This premium solid-wood sauna combines the natural appearance of Austrian stone pine with a contemporary glass design and a practical corner entry. Each sauna is individually manufactured in our own workshop in Switzerland and adapted to the available space and your personal requirements.
The 43 mm solid stone pine walls and ceiling give the sauna an authentic and premium character. The generous glass surfaces visually open the cabin and allow the sauna to blend harmoniously into modern bathrooms, fitness rooms and private wellness areas.
43 mm solid Austrian stone pine
The walls are constructed from continuous 43 mm solid Austrian stone pine logs. The ceiling is also made from 43 mm solid stone pine. The natural grain, warm colour and characteristic knots remain visible, giving every sauna its own distinctive appearance.
When the sauna is heated, the characteristic fragrance of the stone pine becomes noticeable again. This creates a particularly natural atmosphere and emphasises the authentic character of the solid wood.
Swiss made in our own workshop
This stone pine sauna is manufactured in our own workshop in Switzerland. The width, depth and interior design can be selected to suit the available space.
Individual production also allows special room situations and personal design requirements to be considered. The result is not an ordinary standard cabin, but a made-to-measure solid-wood sauna designed specifically for your wellness area.
Practical corner entry with a glass front
The glass door is positioned in the angled corner section of the sauna. This arrangement gives the model its distinctive shape and provides greater flexibility in rooms where a conventional straight-front entrance would not be ideal.
The generous glass front is made from 8 mm clear glass. It allows plenty of light into the cabin and creates an elegant contrast between the transparent surfaces and the solid stone pine.
The threshold-free clear-glass door measures approximately 67 × 187.5 cm and is also 8 mm thick. The absence of a floor threshold provides comfortable access and supports the clean design. The door handle is made from wood on the inside and stainless steel on the outside.
Interior fittings in knot-free aspen
As standard, the sauna is supplied with light interior fittings made from knot-free aspen. The calm and even surface of the aspen creates an attractive contrast to the expressive grain of the solid stone pine.
The interior includes the sauna benches, backrests, the panel between the benches, a wooden floor grid and two headrests. Rounded interior designs and alder variants can also be selected at an additional cost.
Technical specifications
-
Wall construction: continuous 43 mm solid-wood logs
-
Wall material: solid Austrian stone pine
-
Ceiling: 43 mm solid Austrian stone pine
-
Entrance: angled corner entry with a glass front
-
Glass front: 8 mm clear glass
-
Door: 8 mm clear glass, approximately 67 × 187.5 cm, without a floor threshold
-
Door handle: wood inside and stainless steel outside
-
Interior fittings: knot-free aspen as standard, with additional variants available
Included as standard
- Sauna benches according to the selected interior design
- Backrests
- Panel between the benches
- Wooden floor grid
- Two headrests
- Heater guard where required for the selected sauna heater
Configure your personal stone pine sauna
Begin by selecting the required width, depth and interior design. You can then add a suitable sauna heater, control unit and further accessories.
Depending on your preferred wellness experience, various sauna heaters and options for lighting, infrared equipment, coloured lighting and audio are available. This allows you to create an individually manufactured stone pine sauna tailored to your requirements in terms of dimensions, design and technical equipment.
We will be pleased to advise you on the ideal dimensions, interior design, heater output and equipment.
