Harvia Virta Combi HL90S Black with HUUM UKU Glass

SKU: HA.VC9.HU.UKU.G

Shipping with 3.5t van
Delivery time: 0 Workdays (CH - int. shipments may differ)

CHF 3'115,00

incl. 8,1% VAT , plus

Description

Harvia Virta Combi HL90S Black with HUUM UKU Glass

The Harvia Virta Combi HL90S combines a powerful 9 kW sauna heater with an integrated steamer. This enables a range of sauna climates, from traditional Finnish sauna use to gentler sessions with additional humidity.

The black HUUM UKU GLASS panel complements the heater with a minimalist glass surface and a central rotary control. When connected to a complete compatible UKU system, the heater and steamer can be managed from one control interface.

Heater and steamer in one unit

The steamer is integrated into the Harvia Virta Combi behind the front service hatch. This preserves the clean exterior form of the heater.

In Finnish mode, the cabin operates at higher temperatures with comparatively low humidity. In humid mode, the steamer adds moisture and creates a gentler sauna climate at lower temperatures.

Herbal and aromatic sauna applications

The Virta Combi includes a soapstone cup for suitable sauna fragrances and a stainless-steel grate for approved fragrance bags.

This allows the sauna experience to be varied between dry heat, gentle humidity and selected aromatic applications.

Five-litre water tank

The integrated steamer has a water capacity of approximately five litres. The HL90S is the manually filled version; automatically filled models are designated separately as HL90SA.

The vertical indicator on the front shows the water level and visually distinguishes the Virta Combi from the Finnish-only Virta HL90.

Approximately 50 kg of sauna stones

The Virta Combi is designed for approximately 50 kg of sauna stones. The large stone volume supports soft steam and even heat distribution.

HUUM UKU GLASS in black

The black HUUM UKU GLASS panel can be recessed into the wall or surface-mounted with a suitable frame.

The panel alone is not sufficient. A complete compatible UKU Local or UKU WiFi system with main module, temperature sensor and required safety equipment is necessary.

Steamer control

The HUUM UKU system can control a steamer in addition to the sauna heater. The steamer function must be enabled in the settings and wired according to the current installation instructions.

Steamer intensity can be adjusted through the UKU control. The steamer is automatically disabled when the target sauna temperature is set above 90 °C.

The permitted steamer load of the selected UKU main module and the electrical configuration of the Virta Combi must be verified before installation.

Technical specifications

Heater: Harvia Virta Combi HL90S
Harvia item number: HL900400S
Operating modes: Finnish and humid sauna operation
Heater output: 9.0 kW
Recommended cabin volume: approximately 8–14 m³
Dimensions: approximately 810 × 415 × 410 mm
Net weight: approximately 28 kg
Stone capacity: approximately 50 kg
Water tank: approximately 5 litres
Steamer: integrated into the heater
Colour: black
Material: steel
Installation: floor-standing
Electrical connection: according to current Harvia and HUUM wiring diagrams
Control panel: black HUUM UKU GLASS
Required control system: compatible HUUM UKU Local or UKU WiFi
UKU temperature range: 40–110 °C
Steamer operation: only at target temperatures up to 90 °C
Remote operation: available with UKU WiFi and the HUUM app

Required components

Harvia Virta Combi HL90S heater
Approximately 50 kg of suitable sauna stones
Complete HUUM UKU control system suitable for steamer operation
Black HUUM UKU GLASS control panel
Temperature sensor and overheat protection
Door sensor according to the selected configuration
Professional electrical installation and compatibility verification

Planning and installation

This combination must be planned according to the current wiring diagrams from Harvia and HUUM. The steamer output, terminal allocation and permitted load of the UKU steamer output must be checked before connection.

Electrical installation must be completed by a suitably qualified professional.

We will be pleased to assist you in configuring the correct Virta Combi system for your sauna cabin.